Simcenter CAE Simulation

Simcenter™  software lets you predict the performance of your 3D geometry-based designs.

Find out more

Simcenter System Simulation

Using Simcenter™ system simulation solutions, you can evaluate and balance potentially conflicting performance attributes (such as thermal management, operability, drivability or fuel efficiency) from the early development stages until the final performance validation and controls calibration.

Find out more

Simcenter Testing

In the digital era, it remains crucial to test, validate and optimize real-world designs within the constraints of shorter testing cycles, conflicting performance requirements, growing product complexity and reduced costs.

Find out more

Ultra-Thin Precision (UTP) Microphones

The measurement microphone sets have been combined so they fulfil our users’ typical measurement needs. Independently of your measurement system and application you should be able to find a set that suits your needs.

Find out more

Ear simulator kits

The GRAS 43AA is a complete test jig for acoustical measurements on telephone handsets and earphones.

Find out more

Artificial ears, ear & mouth simulators

GRAS artificial ears and ear & mouth simulators are designed to enable measurements under well defined acoustical conditions.

Find out more

Piezoelectric Accelerometers

DJB offers a service where you can send up to 20 cables for us to inspect free of charge. We will supply a report detailing the health of your cables for you to assess your options.

Find out more

Instrumentation

Charge or IEPE – If you are using a charge accelerometer you will need a charge amplifier.  Very few data acquisition systems offer built in charge conditioning so an external box will be required.

Find out more

Cables

Specialist Cable & Assembly for Challenging Applications – Anything IS Possible! DJB provides a bespoke cable assembly service offering a vast range of cables from just 0.8mm diameter, including low noise and armoured solutions whilst offering a wide range of connectors made both in house and off the shelf.

Find out more

SCAN&PAINT 2D

Scan&Paint 2D is a tool to visualize stationary sound fields with an unmatched spatial resolution in full acoustic bandwidth.

Find out more

Near Field Acoustic Camera

The Near Field Acoustic Camera allows localization and real-time analysis of non-stationary noises such as squeaks, rattles and clicks.

Find out more

VOYAGER

Voyager is a portable multi-channel sound analyzer that merges multiple functional units into one device. Data acquisition, signal conditioning and storage are combined into a powerful tablet unit suitable for sound and vibration data recording, NVH testing, acoustic troubleshooting and noise control.

Find out more

ADAS Testing

Designing and testing Advanced Driver Assistance Systems (ADAS) can be challenging because of the need to share detailed information about multiple vehicles and targets in real-time.

Find out more

Aerial Mapping

Direct georeferencing from the air. Accurate position on the ground.

Find out more

Integrated Solutions

Integrated INS solutions for your product developments

Find out more

Driving Robots

Our driving robots can be installed in almost any vehicle and can deliver repeatable and accurate control of that vehicle in a way that no human driver can do.

Find out more

LaunchPad

LaunchPad is a pilotable platform designed to carry Vulnerable Road User (VRU) targets for ADAS development and testing.

Find out more

aVDS

The advanced Vehicle Driving Simulator (aVDS) is a versatile and innovative driving simulator, combining a high-performance motion platform and high specification audio and visual hardware with industry-leading virtual content from rFpro.

Find out more

Flex-Moshon 3D

Low cost alternative to a fully featured robotic GVT

Find out more

EuroNCAP Vehicle Target (EVT)

The Moshon Data EuroNCAP Vehicle Target (EVT) was developed to simulate the rear end of a standard production car and is suitable for RADAR, LiDAR and camera based systems.

Find out more

The MD-Han’i

The first AEB Validation tool designed for end-of-line-vehicle production facilities.

Find out more

DEP MESHWORKS

CAE driven platform for rapid concept CAE and CAD model generation, parametrization of CAE models, enabling optimization, advanced meshing and CAD morphing.

Find out more

DRONE SOLUTION

Drones are being progressively employed to execute jobs of intelligence, surveillance as well as reconnaissance, and there is increasing number of consumer market endeavours including entertainment, agriculture, etc.

Find out more

AUTOMATED VEHICLE

The first AEB Validation tool designed for end-of-line-vehicle production facilities.

Find out more

VIBRATION TEST SYSTEMS (SHAKERS)

These vibration exciters (also called shakers) use permanent magnets and are available as portable and stationary systems for simulating ambient vibration conditions.

Find out more

DRILLING / MILLING / MEASURING

TIRA Mechanical Engineering manufactures any kind of metal parts by machining. The measuring and Monitoring is ensured by 3D coordinate measurement technology.

Find out more

CALIBRATION-VIBRATION TEST SYSTEMS

Used for calibration of sensors, Ceramic vibration system, Very high utilizable frequency range up to 25 kHz and Special guide system

Find out more

Portable Stroboscopes

Our Nova-Pro 100 is designed for simple stroboscopic stop motion inspection and RPM measurement applications. The optional integral laser module is a patented unit that can be added to make the Nova-Pro 100 a full-featured tachometer.

Find out more

Portable Tachometers

PLT200 is a digital, battery-powered portable optical tachometer, which operates up to 25 feet* (8 meters) from a reflective target using a Class 2 laser light source. The ergonomic design allows safe, direct line-of-sight viewing of both the target and the display at the same time while providing a non-slip rubber surface for single-hand operation.

Find out more

Remote Sensors

The right sensor is crucial for accurate measurements. Monarch designs and builds portable and panel mount devices for measuring speed and performing stop-motion inspection; plus, we a sell remote sensors used to detect machinery motion.

Find out more